Vestil WP Series Instruction Manual page 9

Table of Contents
MOUNTING THE PLATFORM ON YOUR FORK TRUCK
Each work platform has 2 mechanisms for securing it to a fork lift: 1) A tine lock; and 2) A nylon safety strap. Both
safety features must be applied every time the platform is used.
Step 1: Mount the platform on your fork truck. Remove the tine retaining pins (SP-series and WP-3737-FD; see FIG.
5B) or put tine lock in unlocked position (WP-series; see FIG. 5A). Drive forward and insert the forks into the fork
channels/pockets on the underside of the platform. For WP-model platforms drive forward until the tines extend
through both the rear and front fork pockets. See Diagrams in
(WP-model platforms excluding WP-3737-FD) or FIG. 5B (SP-series platforms and WP-3737-FD).
NOTE: Both the safety strap and the tine lock(s) must be used every time the work platform is used.
Instructions for applying the safety strap are provided in
SP-175 tine locks
Table of Contents
Rev. 4/3/2020
Step 2
Mast
Forklift
guard
tine
Cotter
pin
Copyright 2020 Vestil Manufacturing Co.
FIG. 5A. Apply the tine lock(s) as shown in FIG. 5A
on p. 10.
WP-3737-FD tine locks
Tine lock
retaining pins
WP, MANUAL
Page 9 of 17