Before starting up for the first time it is advisable
lo load a few moist cloths into the dryer and to let
it run for about 20 minutes. This ensures that no
dust and dirt is left in the drum.
1. Load the laundry
Open the door by pulling the catch forwards.
Load the items one at a time, shaking them out
loosely and close the door.
Please check the laundry does not get caught
between the door and filter.
2. Select the drying time or the
Turn the selector dial to the desired programme
or time, the mains-on light illuminates.
3. Select the required option and
start the machine
Depress Buzzer Off and/or Low Temp. Button, if
you have to dry synthetics with a time controlled
Depress START button, the machine starts
operating and the drying light
To change a programme already in progress,
turn the selector dial to «0», select the new
programme and then depress START button.
4. When drying is completed
The machine stops automatically.
Release the button(s).
Turn the selector dial to «0», the mains-on light
Clean the filter after every drying programme.
A clean filter ensures correct functioning of
If you do not remove the laundry at the end of
the programme, after the cooling phase, the
machine will carry out automatically the
«anticrease» phase which lasts approx 30 mins.
During this period the drum will rotate at regular
intervals to avoid creasing and the buzzer will
sound for 1 second every 10 seconds, unless
you have depressed the BUZZER OFF button.
To remove the laundry during this phase it is
necessary to switch the machine off by turning
the selector dial to «0».