Download Print this page
Crux Sightline PCM-3 Manual

Crux Sightline PCM-3 Manual

Rear-view integration interface for porsche

Advertisement

Quick Links

INTERFACING SOLUTIONS
PORSCHE
2014 -
2015 911 GT3
2013 - 2015 911
(from Software Version 4.xx ONLY)
2014 - 2015 Boxster
(from Software Version 4.xx ONLY)
2008 - 2015 Cayenne
2014 - 2015 Cayman
(from Software Version 4.xx ONLY)
2010 - 2015 Panamera
Disclaimer:
Depending on the HW version of your PCM system, this product may not support some versions.
APPLICATION NOTES:
ONLY FOR VEHICLES WITHOUT FACTORY REAR-VIEW CAMERA
WORKS FOR:
PCM 3.1 NAVIGATION RADIOS
PCM 3.0 NAVIGATION RADIOS (Cayenne Only)
Internal DVD player will not be able to be watched while in motion.
SAFETY PRECAUTIONS
1. Please read through the entire instruction manual before starting any of the installation procedures.
2. We recommend disconnecting the negative side of the battery until ready to code the vehicle.
3. Do not install any of the main modules near any major components or near the HVAC system,
as placing items near the HVAC may cause damage or overheating to the vehicle or interface.
4. We recommend not disconnecting any of the air bag connections behind the dash panels.
5. This product is under Crux's 1 year manufacturer's warranty. Warranty may be voided in the case where
the device shows proof of being opened or improper extreme force.
Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
Sightline
R
REAR-VIEW INTEGRATION
Rear-View Integration Interface for
PORSCHE Vehicles with PCM-3 or PCM-3.1 Systems
1 of 10
PCM-3
rev.051718

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sightline PCM-3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Crux Sightline PCM-3

  • Page 1 4. We recommend not disconnecting any of the air bag connections behind the dash panels. 5. This product is under Crux’s 1 year manufacturer’s warranty. Warranty may be voided in the case where the device shows proof of being opened or improper extreme force.
  • Page 2 DIP 6 = ON DIP 1 = OFF 2 = ON VIDEO IN-MOTION DIP 6 = ON rev.051718 2 of 10 Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...
  • Page 3 Installer must verify this information prior to being installed. rev.051718 3 of 10 Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...
  • Page 4 After connecting the module, set dip switch number “6” to the “ON” position. (Latch locks and releases harness) rev.051718 4 of 10 Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...
  • Page 5 Step 3. Make sure nothing is populating Pin 2 on the 8-Pin connector. 8-PIN (male plug) rev.051718 5 of 10 Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...
  • Page 6: Rear View Camera

    - With the interface coding successful, you will be able to enter the menu structure and see “Rear-View Camera” in the menu structure. REAR-VIEW CAMERA rev.051718 6 of 10 Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...
  • Page 7 DIP 6 = ON coding has been completed. rev.051718 7 of 10 DIP 1 = OFF 2 = ON Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...
  • Page 8 THE PARK ASSIST OPTION WILL NO LONGER BE AVAILABLE ON THE MENU. INTERFACE rev.051718 8 of 10 Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...
  • Page 9 After coding is complete, you must wait 60 seconds until trying to code or decode the vehicle again. rev.051718 9 of 10 Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...
  • Page 10 Rear-View Integration Interface for PORSCHE Vehicles with PCM-3 or PCM-3.1 Systems INTERFACING SOLUTIONS COMPATIBLE RADIOS rev.051718 10 of 10 Crux Interfacing Solutions • 6860 Canby Ave., Suite 116, Reseda, CA 91335 phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com...

This manual is also suitable for:

Sightline pcm-3.1