Electrical Connection - Zanussi TCS 65W Instruction Booklet

GREEN & YELLOW
BLUE
13 AMP FUSE
BROWN
CORD CLAMP

Electrical connection

WARNING: THIS APPLIANCE MUST BE
EARTHED.
The manufacturer declines any liability should this safety
measure not be observed.
If the plug that is fitted to your appliance is not suitable
for your socket outlet, it must be cut off and the
appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent
the hazard of shocks in case it should be plugged into a
13amp socket in another part or your home.
Important
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow
Blue
Brown
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug,
proceed as follows:
• Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
«E» or the earth symbol
yellow.
• Connect the Blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
• Connect the Brown (live) wire to the terminal in the
plug which is marked with the letter «L» or coloured
red.
The plug moulded onto the lead incorporates a fuse. For
replacement, use a 13amp BS1362 fuse. Only ASTA or
BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured insert
at the base of the plug.
A replacement cover/carrier must be obtained from your
local Zanussi Service Centre whose address is listed in
the Customer Care Booklet which accompanies your
instruction manual.
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
- 17 -
Earth
Neutral
Live
, or coloured green and