Table of Contents
Advertisement
1.Open the small door at the
lower part of the cabinet.
4. Open the small cover and
let water flow down
• Close the small cover and
re-insert the reservoir cor-
rectly.
Cleaning the air intake grille
Using a vacuum cleaner remove the fluff
from the air intake grille at the back of the
appliance.
2. Turn the yellow stop
upwards.
5. Push it until it clicks and
turn the yellow stop down-
.
wards ensure it is firmly
locked.
6. Close the small door and
press the START/PAUSE
button again to allow the
programme to continue.
3. Pull out the reservoir.
Important:
The reservoir must be re-
inserted correctly.
After emptying and inserting
the reservoir the START-but-
ton has to be depressed
again to allow the pro-
gramme to continue.
Handy tip: The condensed
water may be used in a
steam iron or to top up a
battery, etc. In this case it
must be filtered (e.g. through
a coffee filter).
Cleaning the drum
When your laundry does not reach the desired
degree of dryness, in other words, when it
turns out either too dry or too damp, we
advise you to clean the inside of the drum with
a cloth soaked with vinegar.
This will eliminate the slight patina that has
formed in the drum (due to residues of
detergent and softeners used in the wash-
ing, and to the lime contained in the water),
which prevents the probes from detecting
the correct degree of dryness.
15
Hide quick links:
Advertisement
Table of Contents
