Positioning/Viewing Angle; Video/Picture Quality - Motorola MBP36S Manual

Positioning/viewing angle

How can I centre the camera on a particular area to monitor?
The camera may be rotated to tilt up or down manually to get a better view of the area.
The camera may be panned left or right to get a better view of the area.
The camera may be mounted on a wall and then adjusted by tilting and panning to get a better
view of the area.
Video/Picture
What can I do if the video appears grainy?
1. Check that the area you wish to monitor is well lit.
2. If the zoom level is set to 2X, the video appears less sharp. Set it to 1X zoom.
3. Set the brightness level on the parent unit to an optimal level.
4. Carefully clean dust off the camera lens.
5. Lift the antenna on the Parent Unit for optimal reception.
6. Face the parent unit display away from direct sun light or other direct lighting.
7. Make sure that the camera view is not obstructed by an object.
8. Check that the camera itself has not been moved, panned, or tilted, beyond your desired
viewing area.
Why is my screen not showing a picture?
Try recharging or press the reset button once
Reset the Units. Disconnect the Battery Pack of the Parent Unit and unplug both the Units' electrical
power, then plug them back in.
Is the Unit turned on? Press and hold the ON/OFF button on the Parent Unit to turn it ON.
Is the correct Camera selected? Change the Camera number, if necessary.
Is the video display turned on? Press the VIDEO ON/OFF button to turn it ON.