Troubleshooting - Motorola MBP36S Manual

TROUBLE SHOOTING
Security
Is the signal between the Parent Unit and the Baby Unit secure?
Yes, the signal transmitted between the Baby Unit and Parent Unit is digitally secure and therefore
safe from unauthorized access.
Charging/Battery
Why does the low battery light on the Parent Unit screen flash?
Battery pack in the parent unit is running low. Connect the Parent Unit to the electrical outlet with
the supplied power adapter for recharging.
Why is the power indicator on the Parent Unit not coming on?
Check whether the Parent Unit is powered on (green ON/OFF LED lit)
Check that the pre-installed battery is not drained.
Recharge the Parent Unit by connecting it to the power supply.
Why is the power LED on the top left of the Parent Unit red even when it is connected to the
charger?
The flashing LED on the Parent Unit indicates it needs charging.
1. Verify that the connections on the Parent Unit and at the electrical outlet are secure.
2. Check that the wall outlet is working by plugging in another device, such as a lamp.
3. Check that the battery is properly installed. A full charge requires 16 hours. The
battery icon should be visible when all connections are correct.