Table of Contents
Advertisement
TECHNICAL GUIDE
SINGLE PACKAGE GAS/ELECTRIC UNITS
AND SINGLE PACKAGE
AIR CONDITIONERS
DF 072
6 NOMINAL TONS
10.4 EER
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
®
DESCRIPTION
®
YORK
Sunline Plus™ units are convertible single package
air conditioners. The units were designed for light commercial
and commercial applications. They can easily be installed on
a roof curb, slab, roof jack or frame.
All units include:
•
Powder Paint finish that meets ASTM-B-117 1000 hour
salt spray standards
•
Permanently lubricated motors
•
Bottom or side air discharge configuration capability
(field convertible)
•
Manufactured under the quality standards of ISO9001
®
•
Simplicity
•
Copper tube/aluminum fin coils
•
Easy access to all components
•
Rigging holes in base rails for lifting
•
Fork lift slots on three sides
•
Single point power connection
•
Complete factory package - tested, charged and wired
•
CSA agency listing on all units
WARRANTY
•
Factory Limited Parts Warranty
•
One-year parts warranty
•
A Five-year parts warranty on the compressor and
electric heat elements.
•
Ten-year parts warranty on the gas-fired heat
exchangers.
254599-YTG-C-0807
Control Board
Advertisement
Table of Contents
Related Manuals for York DF 072
Summary of Contents for York DF 072
-
Page 1: Description
TECHNICAL GUIDE SINGLE PACKAGE GAS/ELECTRIC UNITS AND SINGLE PACKAGE AIR CONDITIONERS DF 072 6 NOMINAL TONS 10.4 EER FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE ® DESCRIPTION ® YORK Sunline Plus™ units are convertible single package air conditioners. -
Page 2: Table Of Contents
DESCRIPTION ......1 PRODUCT NOMENCLATURE ....3 FEATURES . -
Page 3: Product Nomenclature
254599-YTG-C-0807 PRODUCT NOMENCLATURE 6 Ton Sunline Model Number Nomenclature D F 072 N04 A 2 A AA 1 0 1 2 4 A Product Category D = A/C, Single Pkg., R-22 Product Identifier F = 10.4 EER A/C Nominal Cooling Capacity 072 = 6.0 Ton Heat Type and Nominal Heat Capacity C00 = Cooling Only. -
Page 4: Features
• BAS Controls - York’s Sunline™ series units offer factory mounted BAS controls such as Simplicity fort™, Novar, Honeywell, Johnson, and CPC. -
Page 5: Factory-Installed Options
Factory installed option only. • BAS - Building Automation System Controls ® Simplicity INTELLI-Comfort™ CONTROL - The York® ® Simplicity INTELLI-Comfort™ control is factory installed. It includes a supply air sensor, a return air sen- sor, and an outside air sensor. There are provisions for a... - Page 6 • INTELLI-Comfort™ with MOD LINK CON- Simplicity ® TROL - The York® Simplicity INTELLI-Comfort™ with Mod Link control is factory installed. It includes all the features of the INTELLI-Comfort™ control with an addi- tional control to translate communications from MOD- BUS to the BACnet MSTP protocol.
-
Page 7: Field-Installed Accessories
254599-YTG-C-0807 FIELD-INSTALLED ACCESSORIES • SINGLE INPUT ELECTRONIC ENTHALPY ECONO- MIZERS - Includes a slide-in / plug-in damper assembly with fully modulating spring-return motor actuator capa- ble of introducing up to 100% outdoor air with nominal 1% leakage type dampers. The enthalpy system contains one sensor that monitors the outdoor air and determines when the air is cool enough and dry enough to provide free cooling. -
Page 8: Sound Power Rating
TABLE 1: SOUND POWER RATING BLOWER UNIT SIZE SPEED 2,200 HIGH 1.35 1. These values have been accessed using a model of sound propagation from a point source into the hemispheric\free field. The dBA values provided are to be used for reference only. Calculation of dBA values cover matters of system design and the fan manufacture has no way of knowing the details of each system. -
Page 9: Df072 Cooling Capacities (6 Ton)
254599-YTG-C-0807 TABLE 5: DF072 COOLING CAPACITIES (6 TON) Return Air Gross Power Capacity Input (MBh) (kW) (°F) 83.1 5.24 54.6 79.5 5.15 67.8 2750 72.7 5.08 72.7 66.7 5.04 66.7 82.4 5.25 52.1 78.8 5.16 65.0 2475 72.1 5.10 72.1 66.1 5.05 66.1... -
Page 10: Supply Air Blower Performance (6 Ton Belt Drive) - Side Duct Application
TABLE 6: SUPPLY AIR BLOWER PERFORMANCE (6 TON BELT DRIVE) - SIDE DUCT APPLICATION Unit Air Flow Tonnage (CFM) Watts 2500 1059 1560 1077 2400 1032 1405 1054 2300 1005 1260 1024 2200 1160 1002 2100 1060 2000 1900 1800 1700 1600 1500... -
Page 11: Belt Drive Blower Motor And Drive Data . 10 Supply Air Blower Performance (6 Ton Belt Drive) - Side Duct Application
254599-YTG-C-0807 TABLE 8: SUPPLY AIR BLOWER PERFORMANCE (6 TON BELT DRIVE) - SIDE DUCT APPLICATION Unit Motor Tonnage Speed Watts 2256 Med/Hi 2145 2020 Med/Low Available External Static Pressure - IWG Unit Motor Tonnage Speed Watts 2125 Med/Hi 2014 1876 Med/Low 1. -
Page 12: Electrical Data - Df072 Belt Drive W/O Powered Conv. Outlet
TABLE 11: ELECTRICAL DATA - DF072 BELT DRIVE W/O POWERED CONV. OUTLET COMPRESSORS MODEL VOLTAGE TONNAGE EACH EACH 208-3-60 20.7 156.0 230-3-60 20.7 156.0 DF072 (6.0) 460-3-60 10.0 75.0 575-3-60 54.0 1. HACR Type per NEC. 2. These electric heaters do not include a fuse box. If a fuse box is required to meet a local code (i.e. Chicago), the fuse block accessories 2FB04700825 and 2FB04700846 are available for field installation. -
Page 13: Electrical Data - Df072 Belt Drive W/Powered Conv. Outlet
254599-YTG-C-0807 TABLE 13: ELECTRICAL DATA - DF072 BELT DRIVE W/POWERED CONV. OUTLET COMPRESSORS MODEL VOLTAGE TONNAGE EACH EACH 208-3-60 20.7 156.0 230-3-60 20.7 156.0 DF072 (6.0) 460-3-60 10.0 75.0 575-3-60 54.0 1. HACR Type per NEC. 2. These electric heaters do not include a fuse box. If a fuse box is required to meet a local code (i.e. Chicago), the fuse block accessories 2FB04700825 and 2FB04700846 are available for field installation. -
Page 14: Df Physical Data
TABLE 15: DF PHYSICAL DATA EVAPORATOR BLOWER EVAPORATOR COIL CONDENSER FANS CONDENSER COILS COMPRESSOR (Qty. Per Unit) FILTERS CHARGE TABLE 16: ELECTRIC HEAT CORRECTION FACTORS NOMINAL VOLTAGE VOLTAGE MODELS Centrifugal Blower (Dia. x Wd. in.) Fan Motor HP (Direct Drive) Fan Motor HP (Belt Drive) Rows Deep Fins Per Inch... -
Page 15: Typical Field Power & Control Wiring
254599-YTG-C-0807 COOLING ONLY (24 VOLT THERMOSTAT) THERMOSTAT UNIT TERMINAL TERMINALS STRIP TB1 24 VOLT THERMOSTAT 2TH07701024. TO CONTROL THE ECONOMIZER ON SECOND STAGE COOLING, USE THE THERMOSTAT 2TH0401224. COOLING / HEATING (ELECTRONIC THERMOSTAT) MULTI STAGE THERMOSTAT TERMINALS UNIT TERMINAL STRIP TB1 JUMPER LED 1 LED 2... -
Page 16: Unit Dimensions (6 Ton Cooling Only/Electric Heat) Front View
254599-YTG-C-0807 FIGURE 3 - UNIT DIMENSIONS (6 TON COOLING ONLY/ELECTRIC HEAT) FRONT VIEW FIGURE 4 - UNIT DIMENSIONS (6 TON COOLING/GAS HEAT) FRONT VIEW Unitary Products Group... -
Page 17: Unit With Economizer Rainhood
254599-YTG-C-0807 DETAIL “A” FIGURE 5 - UNIT WITH ECONOMIZER RAINHOOD DETAIL “B” FIGURE 6 - UNIT WITH FIXED OUTDOOR AIR/MOTORIZED DAMPER RAINHOOD Unitary Products Group... -
Page 18: Unit Dimensions (Rear View)
FIGURE 7 - UNIT DIMENSIONS (REAR VIEW) FILTER ACCESS BLOWER MOTOR ACCESS DOT PLUGS FIELD-SUPPLIED DISCONNECT SWITCH LOCATION MOUNTING BRACKET FOR DICONNECT SWITCH (Shipped attached to the blower housing inside the blower compartment) WIRING ENTRY (See Detail “B”) DISCONNECT SWITCH LOCATION AND MOTOR ACCESS PANEL FOR UNIT WITH “BELT-DRIVE”... -
Page 19: Typical Applications
254599-YTG-C-0807 FIGURE 9 - TYPICAL APPLICATIONS Unitary Products Group... -
Page 20: Four And Six Point Loading
BACK OF UNIT APPROXIMATE CENTER OF GRAVITY FRONT OF UNIT FIGURE 10 - FOUR AND SIX POINT LOADING TABLE 20: DF 4 AND 6 POINT LOADS WEIGHT DISTRIBUTION UNIT TOTAL DF072 Cooling/ Electric DF072D06 DF072N08 DF072(D,N)10 TABLE 21: CENTER OF GRAVITY DIMENSION 3 - 5 TON 40-¾”... -
Page 21: Guide Specifications
254599-YTG-C-0807 FIGURE 11 - ROOF CURB DIMENSIONS GUIDE SPECIFICATIONS GENERAL Units shall be manufactured by York International Unitary Products Group in an ISO 9001 certified facility. York's Sunline Plus units are convertible single package units. Although the units are primarily designed for curb mount- ing on a roof, they can also be slab-mounted at ground level or set on steel beams above a finished roof. - Page 22 insulated with a minimum 1/2” thick insulation, coated on the airside. Aluminum foil faced insulation shall be used in the furnace compartment and be fastened with ridged fasteners to prevent insulation from entering the air stream. Cabinet panels shall be “large” size, easily removable for servicing and maintenance.
- Page 23 254599-YTG-C-0807 steel for corrosion resistance and allowing minimum mixed air entering temperature of 25°F. Burners shall be of the inshot type, constructed of aluminum coated steel and con- tain air mixture adjustments. All gas piping shall enter the unit cabinet at a single location through either the side or curb, without any field modifications.
- Page 24 ACTUATOR WITHOUT A CONTROLLER) • HINGED FILTER DOOR ACCESS AND TOOLESS ACCESS PANELS • 2" PLEATED FILTERS • DISCONNECT SWITCH • SUPPLY AIR SMOKE DETECTOR • RETURN AIR SMOKE DETECTOR Supersedes: 254599-YTG-B-0507 5005 York Drive INTELLI- Comfort™, 254599-YTG-C-0807 Norman 73069...