All Firmware Update; Short Cut - Konica Minolta SKR 4000 User Manual

Click "close"
There will show the progress
bar.
If upgrade success, the interface
as shown in the picture on the
right will be displayed.
Otherwise, it means failure.

4.8.4. ALL FIRMWARE Update

All of the firmware (MCU, FPGA, and ARM) can be upgraded at the same time, if the file
selected is like "Mars1417V3TIS_IMAGE_41_ALL_2019_04_15.ifm". And the upgrade
steps please refer the steps above.

4.9. Short cut

iDetector supports some shortcuts as follows:

Double-click the left mouse button, the image displayed in center and with maximum size.

Double-click the right mouse button, the window level and width adjusted to WL: 32767/WW:
65535.

Drag the left mouse button, drag the image displayed.

Lateral-drag the right mouse button to adjust the window width, and vertical-drag the right mouse
button to adjust the window level.

F3 Key: Quickly adjust the image window width and window level.
INC.................................................................................................................................
Operation
KONICA MINOLTA,
...............................73