WORKSHOP MANUAL
TC 108 SD - TC 118 SD
General informations
Related topics
[
5.3]
Removal of the dashboard
Map of functional units
REPLACEMENT OF THE ACCELERATOR AND
ADJUSTMENT OF THE CARBURETTOR
Remove the dashboard.
Take off the knob (1) and disconnect the cable (2)
from the connection terminal (3) on the engine.
Undo the two fixing screws (4) and take out the ac ce-
lerator together with the wire.
4
CHAPTER
REVISION
6.7
On reassembling, put the accelerator lever in the «MI-
NIMUM» position, connect the end of the cable (2) to
the terminal (3) on the engine after having mo ved the
cursor (5) in the same «MINIMUM» position specific
to each type of engine and shown in the in struc tion
booklet.
5
1
When assembly is completed ...
Refit the dashboard.
FROM ...
PAGE
1
2018
1 of 1
3
2