Control Panel - Hobby 400 SF De Luxe Manual

7.2 Control panel

Therme
Floor heating
Outer tent light
Wall light
Kitchen light
Ceiling light
Lighting ambience 1
Lighting ambience 2
Lighting ambience 3
Standard control panel
Therme
Floor heating
Outer tent light
Wall light
Kitchen light
Ceiling light
Lighting ambience 1
Lighting ambience 2
Lighting ambience 3
12 V or self-suf.cient contr ol panel
(special request)
07-
Water level indicator
Main switch
Water
Battery voltage
indicator
Water level
indicator
Charge level
indicator
Main switch
Battery / Water
Functions of the main switch
• After initially connecting the camper to the
30 V mains, you must press either the main
switch or any other control key in order to
activate all of the  V electrical devices and
the 30 V electrical devices that are switched
by the system (e.g. therme, floor heating).
• Once the system is in operation, press the
main switch briefly to turn all of the lights off.
All of the  V steady electrical devices (e.g.
water supply, refrigerator control, heat blower)
remain activated. The devices that were pre-
viously switched on are stored in the system;
pressing on the main switch reactivates them.
• Pressing the main switch for at least four
seconds while the system is switched on
will turn off not only the presently activated
devices, but also the entire  V system (in
self-sufficient campers, this will not cut off the
charging of the battery).
If the ignition of the base vehicle has
been switched on, the refrigerator
will operate automatically on  V,
i.e. it is not necessary to press the
main switch. All other  V electrical
devices will only operate on the bat-
tery of the base vehicle if the main
switch has been activated.
Switching the devices and lights
• Lights, the therme and, if applicable, the floor
heating can be switched on and off using the
appropriate function key.
• Press the appropriate key for a longer period
of time to dim the ceiling and wall lights.
• In addition, you can control up to three diffe-
rent lighting ambiences by using the appro-
priate keys (ambience 1 -3). These have been
individually adapted at the factory for each
model.
Indicators
• The indicator for the water level as well as the
combined indicator for the water level and the
battery voltage in the  V vehicle (special re-
quest) are activated by pressing on the appro-
priate key. The LEDs on the scale indicate the
level of water and the voltage of the battery,
respectively.