Features - Fluke 110 Calibration Information Manual

Features

Table 1 is a list of the features for each Meter.
Switch
Position
OFF The Meter is turned off.
Automatically selects ac or dc volts based on the sensed
x
input with a low impedance input.
AC voltage from 0.06 V to 600 V.
e
Frequency from 5 Hz to 100 kHz.
D
DC voltage from 0.001 V to 600 V.
AC voltage from 6.0 to 600 mV, dc-coupled.
l
DC voltage from 0.1 to 600 mV.
Ohms from 0.1 Ω to 40 MΩ.
Ω
Ohms from 0.1 Ω to 60 kΩ.
Continuity beeper turns on at <20 Ω and turns off at
s
>250 Ω.
LoZ low impedance measurement function to
k CHEK
simultaneously test for voltage or continuity.
Diode Test. Displays OL above 2.0 V.
R
Farads from 1 nF to 9999 μF.
S
AC current from 0.1 A to 10 A (>10 to 20 A, 30 seconds
on, 10 minutes off). >10.00 A display flashes. >20 A, OL
j
is displayed. DC-coupled.
Frequency from 45 Hz to 5 kHz.
DC current from 0.001 A to 10 A (>10 A to 20 A,
I
30 seconds on, 10 minutes off). >10.00 A display
flashes. >20 A, OL is displayed.
DC current from 0.1 to 600 μA. AC current from 6.0 to
$
600 μA. DC-coupled.
Temperature from -40 °C to 400 °C (-40 °F to 752 °F)
y
with K-type thermocouple
w
Non-contact sensing of ac voltage.
Note: All ac functions and Auto-V LoZ are true-rms. AC voltage is ac-coupled. Auto-V LoZ, AC mV and
AC amps are dc-coupled.
Table 1. Features
Measurement Function
True-rms Multimeter
110 113 114 115
   

  

  
  
  

   

 
 


Features
116 117
 
 
 
 
 
 
 
 
 
 





5