Enhanced Features Variable Gain Control Technology Most LCD-TV use backlight to adjust the brightness of the picture without considering the adjustment of the contrast level. Our LCD-TV adopts the “Variable Gain Control” technology to adjust the brightness, which will maintain the best possible contrast level at any brightness level chose.
General Safety Precautions This monitor/TV has been engineered and manufactured to assure your safety, and You can prevent your safety from serious electrical shock and other hazards by Keeping in the following attentions. Do not place heavy, wet or magnetic on the LCD or the power cord.
Control Description ① ② ①: VOL ②: VOL ③: CH- ④: CH+ ⑤: Menu ⑥: Power OSD Control: Step 1: Start press the ⑤MENU key to enable the OSD MENU. Step 2: Press the ③CH / ④CH Move menu Bar to be adjusted. Step 3: Press the ①VOL / ②VOL...
5 - Remote control functions 1) POWER : to switch TV on / off. 2) MUTE : to mute or restore the sound. 3) DISPLAY : to display the functions on the screen. 4) INPUT : to activate the LCD on Tuner, AV1 and AV2 mode. 5) SYSTEM : to change the reception system of the multistandard programs.
Basic operations of LCD-TV Turn on the LCD-TV When the power is on, the indictor light will be orange or green(TV mode) . Once signal is received,the light will turn green. And it will remain orange if there is no signal. When set is on ,the input mode will be displayed on the screen.The indicator Light will be turned off in standby mode.
Enter a standby status 1、Press key POWER, the unit will enter a standby status and the indicator light will turn red at the same time. 2、Press key POWER again, the unit will exit the standby status and the indicator light will turn orange( no signal inputting ) or green(signal inputting).
TELETEXT ·Teletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting Teletext. ·Pressing the Picture button whilst in Teletext operation will switch the current status to TV . ·When in Teletext mode, the volume may still be altered to the desired listening level, after pressing or MUTE button.
It is possible to enter your required sub page and continue watching the normal programme until the correct sub page is found. Select the required page number using buttons 0-9. If the top of the page indicates that sub pages are being transmitted yet the page does not change, then the number at the top of the page is there to indicated that the broadcaster has updated the page’s contents, there are no sub pages.
Specifications LCD Panel Type Screen Size LCD Panel Type Viewing Angle (U/D/L/R) Display Colors Active Area (mm) Contrast Ratio Brightness Response Time Resolution Features OSD Controls Inputs Systems Teletext Output Power TFT-LCD 17 inch 1280 x 768 pixels 80/80/80/80 16.7m 370.560x222.336 400:1 450cd/m²...
Trouble Shooting Before calling for repair, please try whether you can settle the problem by yourself. Please contact with after-service center or dealer if you need a help. Problem No red lighting Make sure that the power cord and the other cords are indication securely connected.