Yamaha VS-10 Owner's Manual page 14

CONNECTIONS
Connecting a TV or VCR
Connecting a TV (monitor)
Control center (rear panel)
DIGITAL 1
(V/PCM)
INPUT
L
AUDIO
IN L
Connect the audio output terminals on the TV (monitor) to the TV audio input terminals on the control center using the
supplied audio connection cord and the video input terminal on the TV (monitor) to the MONITOR OUT terminal on the
control center using the supplied video connector cord.
y
• The sound from the TV can be heard using the speakers connected to the control center. (Although you can also hear the sound from the TV
speakers, we recommend you to reduce the TV volume so that you may enjoy the full benefit of the VS-10.)
• To monitor the picture output from the component such as a DVD player, cable TV tuner, camcorder, video game player, etc. of which the
video output terminal is connected to the video input terminal on the control center (as described on pages 11 and 12), switch the video
input of the TV (monitor) connected to the MONITOR OUT terminal on the control center.
• The TV (monitor) without the audio output terminals cannot be connected to the control center.
10
VIDEO SIGNAL
MONITOR
OUT
+ –
DO NOT CONNECT THIS UNIT TO
SPEAKERS OTHER THAN NX-VS10M
MAIN SPEAKERS
OUT
VIDEO 1 TV
SUBWOOFER
R
AUDIO
IN R
Audio connection cord (supplied)
AUDIO/VIDEO
OUT
VCR, etc.
VIDEO OUT
– +
MARK
Video connection cord
(supplied)
SYSTEM
CONNECTOR
As this terminal is used for an
examination in the factory, do not
connect any equipment to this terminal.
R
AUDIO
OUT R
R
OUTPUT
AUDIO/VIDEO
IN
L
AUDIO
VIDEO IN
OUT L
L
INPUT
TV (monitor)