Setting The Clock / Programming The Timer - Siemens PA21011M Instructions For Use Manual

These fins are available in all operation
functions: cooling, dehumidification and air
purification.
The side fins close automatically when the
appliance is turned off via the "Off" key.
If the side fins were open prior to turning the
appliance off, they open again when the
appliance is turned back on.
Setting the clock / Programming the
timer
Setting the clock
The current time (24-hour clock) is
displayed in the top left-hand corner of the
screen the first time the appliance is
connected to the mains electricity supply.
0:00 flashes by default.
To set the time, it is necessary to turn the
appliance on by pressing the "On" key
If you take more than 10 seconds to
perform the next operation during
programming / setting the clock on your
appliance, the screen automatically returns
to the main menu and the factory-set
default settings are displayed or, if this is
not the first time that the timer is set, the
last settings used are displayed on the
screen.
Press the "Timer" key
box appears on the timer menu with the last
function selected ("Off" is displayed by
default).
Instructions for Use
.
. The selection
40
Use the "up" key to place the selection box
on the time. The time is modified using the
"+" and "–" keys. The time increases or
decreases by one minute each time one of
these keys is pressed. Keep the key
pressed in to increase or decrease the
minutes more quickly.
Press the "Ti m e r" key
time. If you do not press this key, the time is
automatically memorised when a period of 10
seconds has passed without pressing any key.
The screen returns to the main menu.
10 sec/
, to memorise the