GE AF-600 FP Operating Instructions Manual page 52

O-53 Start Select
Option:
[0] Digit Input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.
O-54 Reversing Select
Option:
[0] * Digit Input
[1] Bus
[2] Logic AND
[3] Logic OR
NB!
This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.
O-55 Set-up Select
Option:
[0] Digit Input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.
Function:
Select control of the drive start function via the terminals (digital input) and/or via the network.
Activates Start command via a digital input.
Activates Start command via the serial communication port or network option module.
Activates Start command via the network/serial communication port, AND additionally via one of the
digital inputs.
Activates Start command via the network/serial communication port OR via one of the digital inputs.
Function:
Select control of the drive reverse function via the terminals (digital input) and/or via the fieldbus.
Activates Reverse command via a digital input.
Activates Reverse command via the serial communication port or fieldbus option.
Activates Reverse command via the fieldbus/serial communication port, AND additionally via one of the
digital inputs.
Activates Reverse command via the fieldbus/serial communication port OR via one of the digital inputs.
Function:
Select control of the drive set-up selection via the terminals (digital input) and/or via the network.
Activates the set-up selection via a digital input.
Activates the set-up selection via the serial communication port or network option module.
Activates the set-up selection via the network/serial communication port, AND additionally via one of the
digital inputs.
Activate the set-up selection via the network/serial communication port OR via one of the digital inputs.
AF-600 FP LonWorks
8
51