Input Modes And Indications - Yamaha HTR-5730 Owner's Manual

Input modes and indications

This unit is equipped with 2 types of input jacks. Do the
following to select the type of input signals you want to
use.
Press INPUT MODE repeatedly until the
desired input mode is shown on the front
panel display.
INPUT MODE
Front panel
VCR V-AUX DTV/CBL
DVD
Selected input source
AUTO Automatically selects input signals in the
following order:
1) Digital signals*
2) Analog signals
Selects only digital signals encoded in DTS.
DTS
If no DTS signals are input, no sound is
output.
ANALOG Selects only analog signals. If no analog
signals are input, no sound is output.
* If this unit detects a Dolby Digital or DTS signal, the decoder
automatically switches to the appropriate sound field program.
y
You can adjust the default input mode this unit selects when
the power is turned on (see page 41).
Notes
• When you play DTS encoded CD/LDs with the input mode set to
AUTO:
– This unit automatically switches to the DTS decoding
mode. The unit remains in DTS mode (and the "t"
indicator may flash) for up to 30 second after playback of
the DTS source is complete. To manually release the DTS
mode, press INPUT MODE to reselect AUTO.
– The DTS decoding mode may be released if search or skip
operations are performed for more than 30 seconds. To
prevent this, press INPUT MODE to select DTS.
• If the digital output data of the player has been processed in
any way, you may not be able to perform DTS decoding even
if you make a digital connection between this unit and the
player.
DVD MD/CD-R TUNER CD
VOLUME
dB
AUTO
L R
Input mode
PLAYBACK
23