Download Print this page

Troubleshooting - Frigidaire EFIC452-SS Manual

Hide thumbs

Advertisement

Table of Contents

TROUBLESHOOTING

problem
<
> is on
<
> is on
The water reservoir has
water, but<
> is on
<E1> is on
<E2> is on
No water in the water
separator pipe
Ice cube thick and cann't
drop down
Ice cube thin
Unit work but no ice cube
reason
Lack of water
Too many ice cube in the
basket
The inlet solenoid valve
breakdown
Ambient
temp
sensor
breakdown
Refrigerating tube sensor
breakdown
The holes are blocked
Water filter block
Ice making cycle too long
Ambient temp too high
Water temp too high
Ice making short
Ambient temp is high or the
water temp is high
Refrigerant system
leakage
Refrigerant system block
10
solution
Turn off the unit and add water to
<FULL> level, then re-start the unit.
Remove the ice cube in the basket
Need the technical service person to
maintain
The unit can still work, change a new
sensor
The unit can still work, change a new
sensor
Use slim wire to prick each hole, till
the water can flow out easily.
Clean the water filter
Press <-> to reduce the ice mking
time.
Move the unit to cool place
The water temp should be no more
more than 77℉
Press <+> to increase the ice making
time。
Move the unit to somewhere ambient
temp lower than 86℉,fill cool water.
Need the technical service person to
maintain
Need the technical service person to
maintain

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Efic452-ss-cu