Installation - Acer EK220Q Abi User Manual

Installation

Follow these steps to install the monitor on your host system:
Steps
1. Turn off your computer and unplug the power cord.
2. 2-1 Connect the signal cable (VGA cable)
a. Make sure the monitor and computer are powered off.
b. Connect the signal cable to the computer's graphics card port.
2-2 Connect digital cable (Dual input models only)
a. Make sure the monitor and computer are powered off.
b. Connect one end of the HDMI cable to the back of the monitor and the
other end to the HDMI port on your computer.
3. Connect the audio cable (only Audio input model) (optional)
4. Plug the monitor power adapter into the power port on the back of the monitor.
5. Plug the computer power cable and monitor power adapter into the nearby
power outlet.
HDMI
HDMI
VGA
VGA
9