Control Panel - LG ADFD5448AT Owner's Manual

DW_SNA_MFL71467502_00_200727_00_EN.book Page 25 Monday, July 27, 2020 7:19 PM

Control Panel

Control Panel Features
Power On/Off Button
a
• Press this button to turn the washer on or off.
• After the cycle is complete, the power automatically turns off for purposes of safety and economy.
• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off
for safety.
• When power is connected again, the dishwasher will turn on automatically and resume the cycle.
Display
b
• : Rinse Aid Icon
e
- This icon illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse
aid is refilled or the level is set to 0.
- Refer to the Rinse Aid Dispenser Adjustment section.
• : Digital Display
8:88
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and
options are selected, the display shows the total estimated time to complete those selections.
During operation, the display shows the remaining estimated operating time.
NOTE
• The estimated time shown on the display does not include delay times for heating water, etc.
• If Delay Start is selected, the display shows the delay time in hours.
• Cycle time may vary depending on the soil level of your load.
• : Control Lock
CL
- The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this
feature locks all of the buttons, except for the Power button, on the control panel. This feature
does not lock the door.
- While a cycle is running, press and hold Half Load and Energy Saver simultaneously for three
seconds to activate or deactivate Control Lock.
- To start a new cycle, deactivate Control Lock.
• : Wi-Fi
f
- When the appliance is connected to the internet through a home Wi-Fi network, this icon
illuminates.
- Press and hold Delay Start for approximately three seconds to connect to the network.
Chime On/Off Button
c
OPERATION 25