Adjusting The Parameter Settings For Pro Logic Music; Changing Parameter Settings; Pro Logic; Music Parameter Descriptions - Yamaha HTR-5550 Owner's Manual

ADJUSTING THE PARAMETER SETTINGS FOR PRO LOGIC

Changing parameter settings

You can adjust the values of PRO LOGIC
parameters so the sound fields are recreated accurately in
your listening room.
Adjustments should be made with the remote control.
TRANSMIT
CODE SET
SYSTEM
POWER POWER STANDBY POWER
TV AV
CD MD/CD-R TUNER SLEEP
DVD D-TV/CBL V-AUX 6CH INPUT
VCR A B AMP
1
+ + +
TV VOL TV CH VOLUME
– – –
TV MUTE TV INPUT
MUTE
ROCK ENTER-
HALL JAZZ CLUB CONCERT
TAINMENT
1
Press AMP.
2
Select PRO LOGIC
/DTS
SUR. SELECT
9 0
3
Press u / d to select the
parameter.
4
Press j / i to change the
parameter value.
5
Repeat steps 3 and 4 above as necessary to
change other parameters.
Music
MUTE
ROCK ENTER-
HALL JAZZ CLUB
CONCERT TAINMENT
1 2 3 4
TV MONO MOVIE MOVIE
THEATER 2
SPORTS MOVIE THEATER 1
5 6 7 8
2
/DTS
STEREO
SUR. SELECT MATRIX 6.1
9 0 +10 ENTER
EFFECT
PRESET/CH
SET MENU
LEVEL
MENU
TITLE
3
A/B/C/D/E
– +
SELECT
TEST
DISPLAY
RETURN 4
REC
AUDIO
DISC SKIP
AMP
Music.
PRESET/CH
– +
SELECT
PRESET/CH
– +
SELECT
Note
• You cannot change parameter values when "10 MEM.
GUARD" on the SET MENU is set to ON.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the parameter value you edited will
return to the factory setting. If so, edit the parameter
value again.

PRO LOGIC

Music parameter
descriptions
I PANORAMA
Function: Turning the function on extends the front
stereo image to include the surround
speakers for wraparound effect.
Choices: OFF/ON, initial setting is OFF.
I DIMENSION
Function: Gradually adjusts the soundfield either
towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the
front), initial setting is STD (standard).
I CT WIDTH (Center width)
Function: Adjusts the center image from all three
front speakers to varying degrees. The
larger the value, adjusts the center image
towards the main left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from main left and
right speakers), initial setting is 3.
MUSIC
51