Remote Control Transmitter - Yamaha YHT-380 Owner's Manual

REMOTE CONTROL TRANSMITTER

The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the
CD player, tuner, turntable and tape deck connected to this unit are YAMAHA components, then this remote control transmitter will
also control various functions of each component.
KEY FUNCTIONS
For Control of This Unit
Turns the power on/off.
For Other Component Control
Identify the remote control transmitter keys with your component's keys. If these keys are identical, their function will be the
same. On each key function, refer to the corresponding instruction on your component's manual.
Controls tuner
* + : Selects higher preset station
number.
– : Selects lower preset station number.
A/B/C/D/E: Selects the page (A – E) of
preset stations.
STANDBY mode (Europe model only)
While the power is on, pressing the POWER key on the remote
control transmitter switches the unit to the STANDBY mode.
(In this mode, the indicator is half illuminated.)
PLAY/CUT PHONO
POWER
SKIP PLAY CD
SEARCH PAUSE/STOP DISC SKIP
+
—
PRESET A/B/C/D/E TUNER
DIR A DECK A/B DIR B TAPE 1
PLAY TAPE 2
REC/PAUSE STOP REC MUTE
AUX
+
—
• •
VOLUME
PLAY/CUT PHONO
POWER
SKIP PLAY CD
SEARCH PAUSE/STOP DISC SKIP
— +
PRESET A/B/C/D/E TUNER
DIR A DECK A/B DIR B TAPE 1
PLAY TAPE 2
REC/PAUSE STOP REC MUTE
AUX
+
—
VOLUME
POWER
POWER on mode
Selects input source.
Turns the volume level up/down.
Starts/stops record play on turntable.
Controls compact disc player.
* DISC SKIP is applicable only to
compact disc changer.
Controls tape deck.
* DIR A, B and DECK A/B are
applicable only to double
cassette tape deck.
* For a single cassette deck with
automatic reverse function,
pressing DIR A will reverse the
direction of tape running.
POWER
STANDBY mode
9