TO PLAY A SOURCE
Set to the "
Select a desired input source.
* The indicator corresponding to the selected input source
* Note that pressing on each input selector button selects
the source which is connected to the corresponding input
terminals on the rear panel.
Select the speakers to be used.
* If you use two speaker systems, press both the A and B
Play the source.
Adjust to the desired output level.
If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc. (Refer to page 8.)
If you select AUX, TUNER, CD or PHONO, be sure that
TAPE 1 and/or TAPE 2 are not being selected.
If you select TAPE 1 and TAPE 2 at the same time, the
result will be the sound from the tape deck 1.
For TAPE 1 and TAPE 2, whenever the button is pressed,
the corresponding input source is selected or canceled