CONTROLS AND FUNCTIONS
This section describes the basic operation of this unit with
the remote control. First, set the selector dial to the AMP/
TUN position. See "REMOTE CONTROL FEATURES"
for full details.
Switches the function of the numeric buttons to the DSP
Shows the name of components which can be controlled.
Numeric buttons (Input selector buttons)
These buttons select the input source.
See "Description of the Numeric Buttons" for the
Selects the source connected to the 6CH INPUT jacks.
Outputs the test tone.
Selects the on-screen display (OSD) mode for your video
j / i (–/+)
Adjust DSP program parameters and SET MENU items.
–/+ is displayed on the on-screen display.
Selects the effect speaker channel (center, rear and
subwoofer) so you can adjust their output level
Sets the sleep timer.
Switches the function of the numeric buttons to the input
Flashes while the remote control is sending signals.
Turn this dial to select the position for the component to
be controlled. (The proper code must be set up for your
component. See "Setting the Manufacture Codes".) When
a position is selected, the remote control is set to that
component operation mode.
A/B/C/D/E, PRESET –/+
These buttons are used to select a preset station when
using YAMAHA tuner.
To select one of 5 preset station groups (A
PRESET –/+: To select a preset station number (1 to 8)
Select DSP program parameters and SET MENU items.
Enters the SET MENU.
Turns on the power of this unit.
Sets this unit in the standby mode.