Yamaha DSP-AX620 Owner's Manual page 59

Natural sound av amplifier
Hide thumbs Also See for DSP-AX620:
Table of Contents

Advertisement

Problem
The volume level
The component connected to the REC OUT
cannot be increased,
jacks of this unit is turned off.
or the sound is
distorted.
The effect and
It is not possible to record the effect and
surround sounds
surround sounds by a recording component.
cannot be recorded.
A source cannot be
A source component is only connected to the
recorded by a digital
analog input jacks of this unit.
recording component
connected to the
DIGITAL OUTPUT jack
of this unit.
The sound field
"10 MEMORY GUARD" on the SET MENU
parameters and some
is set to ON.
other settings on this
unit cannot be
changed.
This unit does not
The internal microcomputer has been frozen
operate properly.
by an external electric shock (such as
lightning or excessive static electricity) or by
a power supply with low voltage.
The sound is degraded
This unit is in the standby mode.
when listening with
headphones
connected to a tape
deck or CD player that
is connected to this
unit.
There is noise
The unit is too close to the digital or high-
interference from
frequency equipment.
digital or high-
frequency equipment,
or the unit.
Cause
Turn on the power to the component.
Connect the source component to the digital
input jacks of this unit.
Select OFF.
Disconnect the AC power cord from the
outlet and then plug it in again after about
30 seconds.
Turn on the power of the unit.
Move the unit further away from such
equipment.
TROUBLESHOOTING
Remedy
Refer to
page
12
30
12 – 15
37
57

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents