Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, "+" to "+" and "–" to "–". Also, refer to the owner's manual for each component to be connected to this
Compact disc player
PHONO (MM/MC) switch
Select either MM or MC position depending on your PHONO cartridge,
Moving Magnet or Moving Coil type. However, if you use a high output MC
cartridge, select MM position.
To select the MC position, press this switch so that it is held inward. To
select the MM position, press this switch so that it is released outward.
Tape deck 1
Tape deck 2
A OR B:6 MIN./SPEAKER
Video cassette player,
LD player, etc.
: Refer to "ABOUT THE OTHER REAR PANEL PARTS" on page 6.
l00W MAX. TOTAL
To AC outlet