Connections - Yamaha AX-392 Owner's Manual

Never plug in this unit and other components until all connections are completed.
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to L, R (right) to R, "+" to "+" and "–" to "–". Also, refer to the owner's manual for each component to be connected to this
unit.
If you have YAMAHA components numbered as 1, 2, 3, 4, etc. on the rear panel, connections can be made easily by only
connecting the output (or input) terminals of each component to the same-numbered terminals of this unit.
Turntable
GND
CD PHONO TUNER
1 2
CD player
1 2
* * : Refer to "ABOUT THE ACCESSORY
,
TERMINALS" on page 7.
6

CONNECTIONS

MD recorder, etc.
2
*
AUX MD TAPE
PLAY REC PLAY REC
3 4 3 4
Tuner
Tape deck, etc.
IMPEDANCE SELECTOR
SET BEFORE POWER ON
A OR B : 4 MIN. /SPEAKER
A B : 8 MIN. /SPEAKER
A OR B : 8 MIN. /SPEAKER
A B : 12 MIN. /SPEAKER
A
*
B
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
SPEAKERS
Video cassette player,
LD player, etc.
Speakers A
Right
(Europe model)
MAINS
1
l00W MAX. TOTAL
SWITCHED
AC OUTLETS
To AC outlet
Right
Speakers B
Left
Left