Download Print this page

Yamaha AX-392 Owner's Manual: Specifications

Natural sound stereo integrated amplifier.
Hide thumbs

Advertisement

Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.04% THD ...................60W+60W
6 ohms, 20 Hz to 20 kHz, 0.08% THD ...................70W+70W
Maximum Output Power (6 ohms, 1 kHz, 10% THD)
[China and General models only] ..................................110W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring method)
8/6/4/2 ohms.............................................100/120/140/150W
DIN Standard Output Power per Channel
(4 ohms, 1 kHz, 0.7% THD)
[U.K. and Europe models only]........................................95W
IEC Power (8 ohms, 1 kHz, 0.04% THD)
[U.K. and Europe models only]........................................75W
Power Band Width
8 ohms, 30W, 0.1% THD ..............................10 Hz to 50 kHz
Damping Factor
8 ohms, 20 Hz to 20 kHz .....................................100 or more
Input Sensitivity/Impedance
PHONO MM ..............................................2.5 mV/47 k-ohms
CD/TUNER/AUX/MD/TAPE........................150 mV/47 k-ohms
Maximum Input Signal (1 kHz, 0.04% THD)
PHONO MM .................................................................90 mV
Output Level/Impedance
PHONO MM to REC OUT ..........................150 mV/1 k-ohms
Headphone Jack Rated Output/ Impedance
Output Level (8 ohms, 1 kHz, 0.04% THD) ...................0.31V
Impedance ..............................................................560 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TUNER/AUX/MD/TAPE .......................................0±0.5 dB
RIAA Equalization Deviation
PHONO MM .............................................................0±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT (1V) ....................................0.02%
CD/TUNER/AUX/MD/TAPE to SP OUT (30W/8 ohms)
......................................................................................0.02%

SPECIFICATIONS

Signal-to-Noise Ratio (IHF-A Network)
PHONO MM (5 mV Input Shorted) ............................... 82 dB
CD/TUNER/AUX/MD/TAPE
(Shorted, CD DIRECT AMP: ON)............................... 108 dB
Residual Noise (IHF-A Network)
CD DIRECT AMP: ON.................................................. 35 V
CD DIRECT AMP: OFF.............................................. 100 V
Channel Separation
CD/TUNER/AUX/MD/TAPE (Input 5.1 k-ohms Terminated
1 kHz) ............................................................................60 dB
Tone Control Characteristics
BASS:
TREBLE:
Continuously variable LOUDNESS Control
(Level related equalization)
Attenuation..................................................... –30 dB (1 kHz)
Power Supply
[U.K. and Europe models].............................AC 230V, 50 Hz
[China and General models]
............................................AC 110/120/220/240V, 60/50 Hz
Power Consumption
[U.K. and Europe models] .............................................150W
[China and General models]..........................................150W
AC Outlets
3 SWITCHED OUTLETS
1 SWITCHED OUTLET
Dimensions (W x H x D) ..........................435 x 151 x 309.3 mm
Weight.......................................................7.6 kg (16 lbs. 12 oz.)
Accessories.......................................Remote control transmitter
Boost/cut ....................................................±10 dB (20 Hz)
Turnover Frequency................................................350 Hz
Boost/cut ..................................................±10 dB (20 kHz)
Turnover Frequency...............................................3.5 kHz
[Europe, China and General models] .......100W max. total
[U.K. model]..............................................100W max. total
(17-1/8" x 5-15/16" x 12-3/16")
Specifications subject to change without notice.
(In the standby mode: 1.2W)
(In the standby mode: 1.8W)
Batteries
15

Advertisement

   Related Manuals for Yamaha AX-392

Comments to this Manuals

Symbols: 0
Latest comments:
  • #unknown Oct 17, 2014 11:45:
    Come si puo istallare un microfono e in quale lista va istallato?