Selecting & Playing Voices - Yamaha YPP-200 Owner's Manual

Selecting & Playing Voices
12
YPP-200
Turn Power On
...................................................................................................
With the AC power adaptor connected, simply press the
[STANDBY/ON] switch until it locks in the ON position. When the
instrument is not in use, be sure to turn the power off. (Press the switch
again so that it pops up.)
CAUTION
• Even when the switch is in the "STANDBY" position, electricity is still flowing to
the instrument at the minimum level. When you are not using the YPP-200 for a
long time, make sure you unplug the AC power adaptor from the wall AC outlet.
Set the Volume
...................................................................................................
Initially set the [MASTER VOLUME] control about half way
between the "MIN" and "MAX" settings. Then, when you start playing,
re-adjust the [MASTER VOLUME] control for the most comfortable
listening level.
Select a Voice
......................................................................................................
Select the desired voice by pressing one of the voice selectors.
• See "Voice Descriptions" on page 38.
Play
.................................................................................................................................
The YPP-200 also offers keyboard touch response, so the volume
and timbre of notes played can be controlled according to how "hard"
you play the keys. The amount of variation available depends on the
selected voice.
• Some voices do not have keyboard touch response. See "Voice Descrip-
tions" on page 38 for details.
Add Effects As Required
You can add or change reverb and effects as desired by using the
[REVERB] button (page 18) and [EFFECT] button (page 19).
........................................................................