Yamaha YDP-223 Owner's Manual page 50

YDP-223 HOST SELECT switch setting
Set the YDP-223 HOST SELECT switch properly according to the type of connected computer.
• Macintosh: "Mac" (data transfer rate: 31,250bps, 1MHz clock)
• Windows: "PC-2" (data transfer rate: 38,400bps)
TIP If your system does not work properly with the connections and settings listed above, your software may require differ-
ent settings. Check your software operation manual and set the HOST SELECT switch to the proper data transfer rate.
(Data transfer rate of "PC-1" is 31,250bps.)
2. Using a MIDI interface and the YDP-223's MIDI connectors
Connection
Use a MIDI interface device to connect a computer to the YDP-223 using special MIDI cables.
YDP-223 HOST SELECT switch setting
Set the YDP-223 HOST SELECT switch to "MIDI."
50 Connections
YDP-223
YDP-223
MIDI
THRU OUT
Mac MIDI
PC-1 PC-2
HOST SELECT
MIDI OUT
MIDI MIDI
OUT IN
MIDI interface
Windows
IN
MIDI
IN
MIDI
MIDI IN
OUT
MIDI interface
Macintosh