Yamaha YDP-223 Owner's Manual page 47

2
AUX IN [R], [L/L+R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the YDP-223's
speakers. Refer to the diagram below and use audio cables to make the connec-
tions.
CAUTION
When the YDP-223's AUX IN jacks are connected to an external device, first turn on the
power to the external device, then to the YDP-223. Reverse this order when you turn
the power off.
YDP-223
R L/L+R
AUX IN
phone plug
(standard)
3
TO HOST jack
This jack allows direct connection to a personal computer. (Refer to "Connecting a
personal computer" on page 48 for more information.)
4
HOST SELECT switch
This switch should be set according to the type of connected MIDI device or per-
sonal computer. (Refer to "Connecting a personal computer" on page 48 for more
information.)
5
MIDI [IN], [OUT], [THRU] connectors
Use MIDI cables to connect external MIDI devices to these connectors.
Make sure you set the HOST SELECT switch to MIDI when you use these connec-
tors.
(Refer to "About MIDI" on page 45 for more information.)
6
PEDAL jack
Connect the pedal cord from the pedal box. (Refer to "Keyboard Stand Assembly"
on pages 53-55.)
AUX IN
Tone Generator
audio cable
The YDP-223's [MASTER VOL-
UME] and [BRILLIANCE] slider
settings affect the input signal
from the AUX IN jacks, but the
[REVERB] and [EFFECT] set-
tings do not.
If you connect the YDP-223 to a
monaural device, use only the
AUX IN [L/L+R] jack or AUX
OUT [L/L+R] jack.
phone plug
(standard)
AUX OUT
NOTE
NOTE
Connections
YDP-223
47