Thermo Electron RapidStak Unpacking Instructions Manual

Table 1-1. Required packing materials
Item
Locking assembly
Thermo Electron Corporation
RapidStak Packing Instructions
Follow these packing instructions to pack either the RapidStak or the
RapidStak 2x. Additional procedures specific to the RapidStak 2x are clearly
labelled in the instructions.
There are two main procedures you must carry out to ready your RapidStak
for shipping:
• Pack the microplate magazines. For details, see
magazines" on page
• Pack the RapidStak.
1. Secure the RapidStak's moving parts. For details, see
RapidStak's moving parts"
2. Pack the RapidStak in the shipping crate. For details, see
the RapidStak in the shipping crate"
In each of the procedures described below, it is assumed you are using the
original packing materials, as shown in
Image
1-4.
on page 1-5.
on
Table 1-1.
Quantity Quantity
for a for a
RapidStak RapidStak
2x
1 2
"To pack the microplate
"To secure the
"To pack
page 1-8.
Function
Holds the cam nest
secure during shipping.
RapidStak Packing Instructions 1-1