Multi Store; Sequence Play; Sequence Play Job; Utility - Yamaha S08 Owner's Manual

Selected Selected
Display
by by
■ Multi Store [MULTI] → → → → [STORE]
■ Sequence Play [SEQ PLAY]
Seq Sequence Chain
(Tempo) Tempo
■ Sequence Play Job [SEQ PLAY] → → → → [JOB]
1 Init Seq Initialize Sequence
2 SeqAll Sequencer All Chain
■ Utility [UTILITY]
TG (Tone Generator)
1 MasterTune Master Tune
MIDI CHANNEL
2 Device No Device Number
3 Rcv Ch Receive Channel
4 Trans Ch Transmit Channel
5 Thru Port Thru Port
MIDI FILTER
6 RxPgmChng Receive Program Change
7 RxBankSel Receive Bank Select
8 TxPgmChng Transmit Program Change
9 TxBankSel Transmit Bank Select
SEQ SETUP (Sequencer Setup)
10 Sync Sync
11 Seq Ctl Sequencer Control
Parameter Name
Stores your original parameter settings.
Determines the setting of chained playback (Chain Step).
Determines the playback tempo.
Resets (initializes) the chain step settings.
Sets the chained playback (Chain Step) automatically.
Adjusts the tone generator tuning (in 0.1 cent steps; 1000: one semitone).
Determines the MIDI Device Number. This number must match the Device Number of the external MIDI
device when transmitting/receiving system exclusive messages.
Determines the MIDI Receive channel for using the S08 (in the Voice mode) with an external MIDI
device, and for using it as a MIDI tone generator. (Omni: all channels).
Determines the MIDI Transmit channel for transmitting MIDI from the keyboard, controllers and so on.
Many computer sequencers are capable of transmitting data over several MIDI ports, effectively breaking
the 16-channel barrier. When using the USB terminal for MIDI reception, MIDI messages received via
the USB connector can be passed through the MIDI OUT connector of the S08 to other connected
devices. Set the port number here. This is available when the Host Select (UTILITY PAGE 13) is set to
"USB."
Enables (on) or disables (off) reception of Program Change/Bank Select messages on the S08 from an
external MIDI device or S08 sequencer.
Determines whether Program Change/Bank Select messages executed from the S08's panel are
transmitted via MIDI (on) or not (off).
Determines whether Song playback are synchronized to the S08's internal clock (int) or an external MIDI
clock (MIDI).
Determines whether Sequencer Control signals – start, continue and stop – are received and/or
transmitted, and whether MIDI clock messages will be transmitted via the MIDI OUT/USB terminal.
Appendix Reference
Explanation
Guide Quick Section
Multi Store / Sequence Play / Sequence Play Job / Utility
Related
Page
50
28
48
52
52
Settings... MIDI Data Table 2-3 in the separate Data List
28
28
Basics
*30