Yamaha QY20 Owner's Manual page 164

Device No.
(MIDI device number)
Settings: Off, 1 ... 16, All
Master Tune
Settings: 64 ... +00 ...
+63
Metronome
Settings: Off, Record,
Rec/Ply, Always
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
The Device Number setting determines the MIDI channel via which
MIDI exclusive data will be transmitted when a Bulk Dump operation
is executed (page 163) or received when bulk data is received from an
external device.
When set to "Off" no bulk data transfer occurs.
When set to a channel number between 1 and 16 the bulk data
transfers occur via the specified channel.
When set to "All" bulk data is transmitted and received on all
channels.
Tunes the overall pitch of the QY20 sound. The Master Tune range
is from " 64" through "+00" to "+63". Each increment corresponds
to approximately 2 cents (a cent is 1/100th of a semitone). A setting
of "+00" produces normal pitch: A4 = 440 Hz.
Determines when the QY20 metronome will sound. Normally the
QY20 metronome sounds only during realtime recording — the
"Record" setting. With this parameter, however, you can turn the
metronome "Off" so that it never sounds, set it to "Rec/Ply" so that
it sounds during realtime recording and playback, or set it to "Al-
ways" so that the metronome sounds at all times.
Internal data may be corrupted if the power is turned off while the metro-
nome display is showing!
CAUTION
9
Utility Functions
161