11: Modify Gate Time - Yamaha QY20 Owner's Manual

7
Creating a Complete Song
11:
Modify Gate Time
First measure in range to
be modified (001 ... 999).
Track (TR1 ... TR4).
Gate time ratio
(000% ... 200%).
Amount of gate time
change
( 99 ... +00 ... +99).
ENTER
Press [ 1/NO ]
to cancel.
134
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Last measure in range to
be modified (001 ... 999).
– 1 + 1
NO YES
The Modify Gate Time job can be used to produce a more staccato or
legato feel, as required. Experiment with the parameters to get a feel for
MUSICAL
NOTE what they do.
Increases or decreases the gate times (length)
of all notes in the specified track and range of
measures.
The "rate" parameter sets the ratio between
the shorter and longer gate time values. A setting
of "100%" maintains the original relationship
between the notes, lower values produce a nar-
rower gate time range, and higher values produce
a broader gate time range.
The "offset" parameter determines the amount
of gate time modification. " " settings shorten
the gate time while "+" settings increase the gate
time.
After setting the parameters as required, press
[ ENTER ] . "Are you sure?" will appear on the
display. Press [ +1/YES ] to confirm that you want
to go ahead with the modify gate time operation,
or press [ 1/NO ] to cancel.