Drum Kit Voice Chart (Voices 101 - 110); Function Parameters - Main Voice - Yamaha PortaTone PSR-225GM Owner's Manual

PLAYING VOICES — THE VOICE MODE

Drum Kit Voice Chart (voices 101 - 110)

When one of the 10 panel Drum Kit voices are selected you can
play different drums and percussion instruments on the keyboard.
The drums and percussion instruments played by the various keys
are marked by symbols above the keys.
VOICE
STYLE
Function Parameters — Main Voice
The Function parameters provide additional settings for the Main
voice. These settings are especially useful when using a second voice
in the Dual or Split modes, since they let you change or enhance the
sound of the Main voice separate from the Dual or Split voice. These
settings include:
• Volume
• Octave
• Pan
1
Select the Function mode.
Press the FUNCTION button.
2
Select the desired Function parameter number.
While the "FUNCTION" indication is flashing, use the numeric key-
pad to select the desired Main Voice Function parameter number (1 -
6). (See the "Parameters" list below for details.)
Function parameter numbers can be selected in the same way as with
the voices (see page 28). You can use the numeric keypad to directly
enter the number, use the +/- keys to step up and down through the
parameters, or press the FUNCTION button to advance through the
parameter numbers.
30
Std.Kit1
101
ACMP ON
• Reverb Send Level
• Chorus Send Level
• DSP Effect Send Level
Flashes to indicate Function
parameter can be selected.
STYLE
FUNCTION
MEASURE
No.
101
102
103
104
105
106
107
108
109
110
M.Volume
F01
001 116 TEMPO
Name LCD
Standard Kit 1 Std.Kit1
Standard Kit 2 Std.Kit2
Room Kit Room Kit
Rock Kit Rock Kit
Electronic Kit Elct.Kit
Analog Kit AnlogKit
Dance Kit DanceKit
Jazz Kit Jazz Kit
Brush Kit BrushKit
Symphony Kit SymphKit
Since the "FUNCTION"
indication flashes for only a
couple of seconds, make
sure to select the parameter
quickly after step 1 above.