Advertisement
3. Technical specifications
(continuation)
3.7. Firmware
· Upgradable via RS485
3.8. Limitations
ULP485 is engineered to be a robust device with
minimal downtime. This new shape has been
designed for optimum water spillage which implies
lower probability of ice formation. Frost might
affect measurements if it blocks the wave path.
The input wires are protected by Transient Voltage
Suppression (TVS) diodes. Also, the instrument
body is built in Polyamide.
3.9. Quality control
Every single unit is automatically calibrated on a
wind tunnel. A Q/C report for both module and
angle is generated and kept in our files. Standard
deviation is checked to warranty that each unit is
been calibrated to the hightest standards.
4. Configuration options
baudrate
2400 to 115200 (8n1) bauds
output rate:
0.1 to 20 Hz.
output units:
m/sec., Knots or Km/h.
The Ultrasonic ULP can be set up by using a special
App made by Calypso Instruments.
In order to use the APP you should download the
following documentation:
Ultrasonic ULP 485 configurator.exe
ULTRASONIC ULP 485
User manual
Main screen.
Image 8.
ULTRASONIC ULP 485
User manual
Advertisement
