Power Connector Cable - HP ProBook 450 G8 Maintenance And Service Manual

2. Remove the speakers from the computer (2) .
Reverse this procedure to install the speakers.

Power connector cable

To remove the power connector cable, use this procedure and illustration.
Table 5-15 Power connector cable description and part number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
Remove the power connector cable:
1. Remove the two Phillips M2.5 × 4.0 screws (1) that secure the right display hinge to the computer, and
then rotate the hinge off the power connector (2).
2. Remove the Phillips M2.0 × 4.0 screw (3) that secures the power connector to the computer.
3. Disconnect the cable from the system board (4).
(Preparation for disassembly on page
(Bottom cover on page 30).
30).
Battery on page 31).
Component replacement procedures
Spare part number
M21725-001
49