Initial Settings Of The Pocket Controller - Yamaha piano Operating Manual

Initial Settings of the Pocket
Controller
The following functions are available to control the
Disklavier remotely. Set up a variety of useful functions
to your preference.
Title Bar
[PRC-100 Menu] icon
Task Bar (→ pg. 19)
[PRC-100 Menu] screen
Tip:
Tap on ([PRC-100 Menu] icon) to return to
the [PRC-100 Menu] screen.
[Interface]: Usually utilize this function to control
the Disklavier remotely. The [Main] screen is the top
menu of this function. (→ pg. 12 in "Quick Guide")
[Interface Updater]*: Updates the [Interface].
[Piano Assign]*: (→ pg. 18 "Pairing the Pocket
Controller and the Disklavier")
[Service Center]*: (→ pg. 66 "Diagnosing the
Disklavier")
[Light & Power]*: Makes energy conserving
settings.
[Recalibrate]: (See "Calibrating the Touch Screen"
below.)
[Date/Time]: (See "Setting up the Current Date and
Time" below.)
[Network]*: Lists available network services.
[System Info]*: Shows system information
(memory, storage, version).
* For normal use, modification of these setups are not
required.
Calibrating the Touch Screen
The following procedure calibrates the touch screen to
improve the accuracy of the tapping operation.
Tap on [Recalibrate] in the [PRC-
100 Menu] screen, and then firmly
tap on the cross hairs that appear in
sequence one by one.
When the recalibration is completed, the [PRC-100
Menu] screen resumes.
Setting up the Current Date and Time
1
Tap on [Date/Time] in the [PRC-
100 Menu] screen.
[Set System Time] screen
2
Tap on [Time Zone]
your time zone in the drop down list.
Note:
If your time zone does not appear in the
drop down list, add the zone to the list by
following the procedure in "Adding Your City
to the [Time Zone] Drop Down List" on page
17, and then repeat step 2.
CHAPTER 1: Getting Started
Cross hair
City time button
[Date] button
, and then on
Continue to next page...
16