Program Change On/Off; Control Change On/Off - Yamaha P-60 Owner's Manual

Program Change ON/OFF

Normally the P-60 will respond to MIDI program change numbers received from an
external keyboard or other MIDI device, causing the correspondingly-numbered voice
to be selected on the corresponding channel (the keyboard voice does not change). The
P-60 will normally also send a MIDI program change number whenever one of its
voices is selected, causing the correspondingly-numbered voice or program to be
selected on the external MIDI device if the device is set up to receive and respond to
MIDI program change numbers.
This function makes it possible to cancel program change number reception and trans-
mission so that voices can be selected on the P-60 without affecting the external MIDI
device.
Procedure
While holding down the A-1 and C 0 keys, press the C 6 key.
A-1 C 0

Control Change ON/OFF

Normally the P-60 will respond to MIDI control change data received from an external
MIDI device or keyboard, causing the voice on the corresponding channel to be
affected by pedal and other "control" settings received from the controlling device (the
keyboard voice is not affected). The P-60 also transmits MIDI control change informa-
tion when the pedal or other appropriate controls are operated.
This function makes it possible to cancel control change data reception and transmis-
sion so that, for example, the P-60's pedal and other controls can be operated without
affecting an external MIDI device.
Procedure
While holding down the A-1 and C 0 keys, press the D6 key.
A-1 C 0
For information on program
change numbers for each of the
P-60's voices, refer to page 34
in the MIDI Data Format sec-
tion.
C 6
The highest
key
For information on control
changes that can be used with
the P-60, refer to the MIDI Data
Format on page 31.
D6
The highest
key
TIP
TIP
MIDI Functions 25
P-60