Download  Print this page

Other Functions; Frame Display; Display Dimmer; Peak Hold - Yamaha MD8 Owner's Manual

Multitrack md recorder
Hide thumbs

Advertisement

72

Other Functions

8
Other Functions

Frame Display

The Frame Disp function allows you to choose whether the display counter shows 86 frames
per second, the standard frame count for MiniDisc, or 30 frames per second for when the
MD8 is generating MTC.
1. Press the [UTILITY] button and use the DATA dial to select the Frame Disp
function.
2. Press the [ENTER] button.
The display now reads 86 Frame .
3. Use the DATA dial to select 86 or 30.
4. Press the [ENTER] button.
5. Press the [EXIT] or [UTILITY] button to leave the Utility mode.

Display Dimmer

The Display Dimmer function allows you to set the brightness of the display. Set the value
that best suits your working habits.
1. Press the [UTILITY] button and use the DATA dial to select the Display
Dimmer function.
2. Press the [ENTER] button.
The display now reads Dimmer .
3. Use the DATA dial to set the brightness (1–5).
4. Press the [ENTER] button.
5. Press [EXIT] or [UTILITY] button to leave the Utility mode.

Peak Hold

The Peak Hold function makes the meter segments lit by the loudest signal peaks stay on,
so you can easily check for peak levels. The Peak Hold function can be reset by pressing the
[DISPLAY] button.
1. Press the [UTILITY] button and use the DATA dial to select the Peak Hold
function.
2. Press the [ENTER] button.
The display now probably shows Hold OFF .
3. Use the DATA dial to set this function to ON.
4. Press the [ENTER] button.
5. Press [EXIT] or [UTILITY] button to leave the Utility mode.
MD8—Owner's Manual

Advertisement

Table of Contents
loading

  Related Manuals for Yamaha MD8