Touring the MD8
Disc Transport Section
Disc Transport buttons
REHE—This button is used to enter Rehearse mode. The REHE indicators ﬂash in Rehearse
Pause mode and stay on continuously while rehearsal is in progress.
REC—This button is used to enter Record mode. The REC indicators ﬂash in Record Pause
mode and stay on continuously while recording is in progress.
PLAY—This button is used to start normal playback, start rehearsal, and start recording. It
can also be used to cancel rehearsal and recording. In this case, normal playback continues
from the point at which the [PLAY] button is pressed. The PLAY indicators light up while
playback is in progress and ﬂash when playback is paused.
PAUSE—This button is used to pause playback, recording, or rehearsal.
STOP/TOC WRITE—This button is used to stop playback, rehearsal, and recording. It's
also used to write the TOC data to disc when the MD8 is stopped.
AUTO PUNCH I/O button
This button is used to turn on the Auto Punch In/Out function.
SONG SEARCH buttons
These buttons are used to search for songs.
LAST REC SEARCH IN/OUT & SET buttons
The SET button is used in combination with the LAST REC SEARCH IN/OUT buttons to
set the LAST REC IN/Punch In and OUT/Punch Out points. The LAST REC SEARCH
IN/OUT buttons are used to locate the LAST REC IN and OUT points.
LAST REC SEARCH