Xerox AltaLink B81 Series User Manual page 313

Troubleshooting
Clearing Staple Jams in the Office Finisher
WARNING: Do not perform this procedure while the printer is printing.
1. Open the finisher front door.
2. Pull the stapler assembly toward you until it stops.
3. Push the stapler assembly to the right, as shown.
4. To remove the staple cartridge, grasp the orange handle, then pull the handle toward you.
5. Check inside the finisher for any loose staples, then remove the staples.
Xerox ® AltaLink ® B81XX Series Multifunction Printer 313
User Guide