Specifications - Yamaha i88X Owner's Manual

To change mLAN settings, select [Start | (All) Programs | Start Up], then start mLAN Manager.
- (When a message such as "file cannot be found" appears when uninstalling:)
Try executing the installation once more, then uninstall again.
■ (Windows) mLAN Manager (the mLAN icon in the task bar) has disappeared.
• Select [Start | (All) Programs | Start Up (or mLAN Tools)], then select mLAN Manager.
Specifications
■ General Specifications
Sampling Frequency
Fs 44.1kHz, 48kHz
Frequency
Response
Fs 88.2kHz, 96kHz
Total Harmonic Distortion
Dynamic Range
Noise level
Crosstalk
AD converter
DA converter
Interface Functions
Compatible mLAN transfer rate
mLAN Audio I/F
MIDI I/F
■ Input/Output Specifications
Analog Input
XLR/TRS Phone Combo
INPUT 1,2
Balanced, +48V ±3V Phantom,
Mic/Line/Hi-Z
INPUT 3-8
TRS Phone
INSERT IN 1-2
TRS Phone
Analog Output
OUTPUT 1-8
(MASTER OUT L/R) TRS Phone, Balanced
INSERT OUT 1-2
TRS Phone
PHONES TRS Phone, UnBalanced
Internal, External
20Hz to 20kHz
20Hz to 40kHz
Less than 0.01%
110dB
–100dBu (Output Vol: Min.), –90dBu (Output Vol: Max.)
75dB
24bit Linear, 128times over sampling (Fs 44.1,48kHz) / 64time over sampling
(Fs 88.2,96kHz)
24bit Linear, 128times over sampling (Fs 44.1,48kHz) / 64time over sampling
(Fs 88.2,96kHz)
S400 (400Mbps) / S200 (200Mbps)
18ch Input / 18ch Output (Fs 44.1kHz, 48kHz)
Type: Input (Analog) 8ch, Digital Input 2ch, ADAT Input 8ch
14ch Input / 14ch Output (Fs 88.2kHz, 96kHz)
Type: Input (Analog) 8ch, Digital Input 2ch, ADAT Input 4ch
1 Input port / 1 Output port
Connector
–60dBu to –16dBu (Mic)
*2
,
–34dBu to +10dBu (Line)
–56dBu to –12dBu (Hi-Z)
*3
–20dBu to +10dBu
, Balanced, Line
*4
, UnBalanced
Connector
*3
*4
, UnBalanced
Normal Rate Fs 44.1kHz(–10%) to 48kHz(+6%)
Double Rate Fs 88.2kHz(–10%) to 96kHz(+6%)
0+1/–3dB, Input to Master Output L/R (Fs 48kHz, MIC/LINE)
0+1/–3dB, Input to Master Output L/R (Fs 96kHz, MIC/LINE)
1kHz, Line Input to Master Output L/R (Input Gain = Min,
Output Vol = Max)
Line Input to Master Output L/R (1/2ch) or 3–8 ch
1kHz
Input level
Nominal Max. before clip
–2dBu
Output level
Nominal Max. before clip
+4dBu +18dBu
–2dBu +12dBu
— 100mW+100mW
*1
Input Impedance
–2dBu
3kΩ
+24dBu
+2dBu 500kΩ
+24dBu 10kΩ
+12dBu 10kΩ
Actual Load Impedance
(Rated Load Impedance)
2kΩ (10kΩ)
600Ω (10kΩ)
33Ω (33Ω)
25