Advertisement
3
Make the appropriate Voice Condition settings for Organ Bass 2.
Pressing the User button [1] on the panel again calls up the Voice Condition display. On Page 1 of the
display, set Reverb to 24, Volume to 18, and Poly to ON. On Page 2 of the display, set Tune to -2.
NOTE
The pedal polyphonic mode makes it possible to play legato on the pedalboard, letting you play
notes on the pedalboard with both your left and right foot, at bar 9 in section A.
4
Confirm that the Effect is set to [PRESET] or [THRU] in display Pages 3 and 4.
This completes the PEDAL VOICE 1 settings.
For the M1 Registration, PEDAL VOICE 2 is not used. Turn its volume setting to 0.
Now that the Registration Memory 1 settings are complete, record them to the [1] button in Registration
Memory section. Before recording, confirm that the lamps of the [U. ORGAN FLUTES] and [L. ORGAN
FLUTES] buttons are lit.
While holding down the [M.] (Memory) button in the Registration Memory section, press the
[1] button.
When the Registration is being stored, the [1] button flashes momentarily.
Playing the ELS-01/01C — Tutorial
69
Advertisement
