Yamaha Electone EL-100 Owner's Manual page 77

Yamaha electone owner's manual el-100
Table of Contents

Advertisement

6
After numbers appear on the LED display of the M.D.R., begin
playing.
Once the setup operation in step #5 is complete, a number will
appear on the LED display indicating that you can begin
recording your performance. The number also indicates the
amount of memory left on the disk.
If you make a mistake during recording:
1. Press the PLAY button while the M.D.R. is still running.
This stops the recording and returns you to the starting point of
the song.
The letters "rE" (retry) appear on the left side of the LED display
and the PLAY and CUSTOM PLAY LEDs start flashing,
indicating that you can re-record the song.
2. Press PLAY again to begin re-recording the song.
Re-recording starts from the beginning of the song and replaces
the previously recorded performance with the newly recorded
performance.
7
When you finish playing, press the STOP button.
After the small bars flash to draw a square on the LED to
indicate the processing for stop, the STOP lamp lights up,
indicating the recording process is finished.
The song number will be displayed on the LCD display,
indicating that the number contains recorded data.
<SONG NAME>
01:SONG 1
8
To hear your newly recorded performance, press the PLAY
button.
Play back will begin after a couple of seconds. For more
information on playback and other playback-related functions,
see page 84.
UPPER
LOWER
SONG
REPEAT
PAUSE
MUSIC DISK RECORDER
NOTE:
The short time it takes to set up for recording is
recorded as well, causing a short pause before
playback of the song.
RECORD
UPPER
LOWER
SONG
REPEAT
PAUSE
STOP
MUSIC DISK RECORDER
UPPER
LOWER
SONG
REPEAT
PAUSE
MUSIC DISK RECORDER
Indicates the M.D.R. is in the stop process.
Never eject the floppy disk before the STOP lamp
lights up.
NOTE:
When the available memory reaches "008" or less,
the numbers begin flashing to warn you. If this
happens, stop recording before the display reaches
"000."
Never attempt to press the eject button or turn
the power off during recording, reading and
playing back. Doing so can damage the disk
and possibly the disk drive. Be sure to
remove the floppy disk from the disk drive
before turning off the power.
RECORD
PLAY
PEDAL CONTROL
UPPER
LOWER
PEDAL CONTROL
FROM
TO
SONG DEL.
SONG COPY
STOP
PLAY
SONG SELECT
RECORD
TEMPO
FORMAT
PLAY
PEDAL CONTROL
UPPER
LOWER
PEDAL CONTROL
FROM
TO
SONG DEL.
SONG COPY
PLAY
SONG SELECT
RECORD
CUSTOM PLAY
TEMPO
FORMAT
RECORD
PLAY
PEDAL CONTROL
UPPER
LOWER
PEDAL CONTROL
FROM
TO
SONG DEL.
SONG COPY
STOP
PLAY
SONG SELECT
RECORD
TEMPO
FORMAT
SHIFT
CUSTOM PLAY
SHIFT
6
SHIFT
CUSTOM PLAY
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents