Yamaha Electone EL-100 Owner's Manual page 19

2
Press one of the Data Control buttons that corresponds to the voice you
wish to select. (Pop Organ 1, in this case)
DATA CONTROL
Organ1
PopOrgan1 Accordion
The first letter of the selected voice will start blinking. You have
selected Pop Organ 1 for the Upper Keyboard Voice.
3
If you wish to, you can select voices from Lead Voice, Lower
Keyboard Voice and Pedal Voice sections, following steps #1 and #2
above.
4
Set the volume for each voice section.
There are two volume controls:
Coarse:
Use the VOLUME controls of each voice section on the panel to set the
desired level for each voice. The controls have seven volume settings,
from a minimum of 0, or no sound, to a maximum of full volume.
STRINGS BRASS
ORGAN PIANO
Fine:
Pressing the same panel voice button again (or the same Data Control
button corresponding to the selected voice) calls up the Voice
Condition display. Use the Page buttons to select page 2, which
contains Volume setting.
DATA CONTROL
INIT.T: 8
JazzOrgan1
UPPER KEYBOARD VOICE
CLARI- SAXO- CHORUS HARMO-
NET PHONE NICA
GUITAR VIBRA- COSMIC TUTTI
PHONE
¨1⁄
FEET:PRESET
DATA CONTROL
MAX
MIN
DATA CONTROL PAGE
2
19