Setting Up The Clavinova; Sheet Music Braces; Music Rest - Yamaha Clavinova CVP-900 Owner's Manual

Setting Up the Clavinova

Key cover
■ To open the key cover:
Lift the cover slightly, then push and slide it open.
■ To close the key cover:
Slide the cover toward you and gently lower the
cover over the keys.
Be careful to avoid catching
your fingers when opening or
closing the cover.
CAUTION
Hold the cover with both hands when opening or closing it. Do not
release it until it is fully opened or closed. Be careful to avoid catching
fingers (yours or others, especially children's) between the cover and
the unit.
CAUTION
Do not place objects such as a piece of metal or paper on top of the
key cover. Small objects placed on the key cover may fall inside the
unit when the cover is opened and may be nearly impossible to
remove. This could cause electric shock, short circuit, fire or other
serious damage to the instrument.

Music Rest

■ To raise the music rest:
1
Pull the music rest up and toward yourself as far as it
will go.
2
Flip down the two metal supports at the left and right
on the rear of the music rest.
3
Lower the music rest so that it rests on the metal
supports.
■ To lower the music rest:
1
Pull the music rest toward yourself as far as it will go.
2
Raise the two metal supports (at the rear of the music
rest).
16
CVP-900
CAUTION
3
Gently lower the music rest backward until it is all
the way down.
CAUTION
Do not try to use the music rest in a half-raised position. Also, when
lowering the music rest, let the music rest all the way down before
releasing it.

Sheet Music Braces

These braces are for holding the pages of music books in
place.
■ To open
■ To close
Lid
One long stay and one short stay are provided on the
lid. Use one of them to open the lid to the desired angle.
For the longer stay, use the inner recess, and for the shorter stay, use
the outer recess to support the lid.
Longer stay
■ To open the lid:
1
Raise the music rest as described in "Music Rest" on
page 16.
2
Raise and hold the right side of the lid (viewed from
the keyboard end of the instrument).
3
Raise the lid stay and carefully lower the lid so that
the end of the stay fits into the recess in the lid.
Shorter stay