Using The Effects; About The Effect Connection Sequence - Boss ME-50 Owner's Manual

Using the Effects

When the power is turned on, the ME-50 always switches to Manual mode, and the OVERDRIVE/DISTORTION,
MODULATION, and DELAY are switched off.
* When the DELAY TYPE is set to HOLD, the DELAY indicator goes on, the DELAY pedal's indicator flashes at a fixed interval,
indicating recording standby is enabled. (p. 17)
All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
Those companies are not affiliated with BOSS and have not licenced or authorized BOSS's ME-50. Their marks are used
solely to identify the equipment whose sound is simulated by BOSS's ME-50.

About the Effect Connection Sequence

The ME-50 automatically selects the optimum sequence for connecting the effects according to the effect (p. 19) you select with the
expression pedal.
When WAH, RING MOD, +1OCTAVE, or -1OCTAVE is Selected
fig.0060
TONE MODIFY EXPRESSION
VOLUME
NS
( PEDAL )
When RESONANCE and VOICE is Selected
fig.0070
TONE MODIFY COMPRESSOR
VOLUME
NS
( PEDAL )
Also, when the MODULATION type is TREMOLO or UNI-V, MODULATION is connected before OVERDRIVE/DISTORTION.
(Example) EXPRESSION: WAH; MODULATION: TREMOLO
fig.0080
TONE MODIFY
( EXPRESSION )
OVERDRIVE /
NS
DISTORTION
8
COMPRESSOR
MODULATION DELAY
OVERDRIVE /
DISTORTION
MODULATION DELAY
WAH
COMPRESSOR
VOLUME
DELAY
( PEDAL )
OVERDRIVE /
DISTORTION
REVERB
EXPRESSION
REVERB
TREMOLO
( MODULATION )
REVERB