Specifications - Makita AT1150A Instruction Manual

ENGLISH
(Original instructions)
1 Trigger
2 Contact element
3 Magazine
4 Compressor air output per
minute
5 Stapling frequency (times/min)
6 Depth adjusting plate
7 Hex wrench
8 Hook
9 Screw

SPECIFICATIONS

Model
Air pressure
Fastener
Applicable staples
Staple capacity
Min. hose diameter
Pneumatic tool oil
Dimensions (L x W x H)
Net weight
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications may differ from country to country.
Intended use
The tool is intended for fastening on interior work and
furniture work.
The tool is for high-volume professional application only.
Do not use it for any other purpose. It is not designed to
drive fasteners on a hard surface like steel and concrete.
PNEUMATIC NAILER/STAPLER SAFETY
WARNINGS
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury, electric shock
and/or fire.
Save all warnings and instructions for future
reference.
For personal safety
maintenance of the tool, read this instruction manual
before using the tool.
Explanation of general view
10 Lock pin
11 Pusher
12 Air fitting
13 Air socket
14 Workpiece
15 Sequential trip trigger (SINGLE
SHOT PART)
16 Continuous shot trigger
17 Conical
18 Exhaust cover
Type 16 Ga Staple Medium Crown
Length
Diameter
Width
370 mm x 87 mm x 290 mm
and proper operation
AT1150A
0.44 – 0.83 MPa (4.4 – 8.3 bar)
25 - 50 mm (1" – 2")
11 mm (7/16")
25 mm – 50 mm
ISO VG32 or equivalent
1.8 kg
General safety
1. Any other use except for intended use of this
tool is forbidden. Fastener driving tools with
continual contact actuation or contact actuation
shall only be used for production applications.
ENE073-3
2. Keep fingers away from trigger when not
operating this tool and when moving from one
operating position to another.
3. Multiple hazards. Read and understand the
safety
disconnecting, loading, operating, maintaining,
changing accessories on, or working near the
ENB132-1
tool. Failure to do so can result in serious bodily
injury.
4. Keep all body parts such as hands and legs etc.
away from firing direction and ensure fastener
cannot penetrate workpiece into parts of the
body.
5. When using the tool, be aware that the fastener
could deflect and cause injury.
6. Hold the tool with a firm grasp and be prepared
to manage recoil.
7. Only technically skilled operators should use the
and
fastener driving tool.
8. Do not modify the fastener driving tool.
Modifications may reduce the effectiveness of
safety measures and increase the risks to the
operator and/or bystander.
9. Do not discard the instruction manual.
10. Do not use a tool if the tool has been damaged.
19 Driver guide
20 Latch
21 Slotted bit screwdriver
22 Door
23 Drain cock
24 Air filter
25 Oiler
26 Pneumatic oil
AT2550A
16 Ga Staple Wide Crown
16 Ga
25 mm (1")
140 pcs.
6.5 mm
370 mm x 76 mm x 260 mm
2.2 kg
instructions before connecting,
9